Tool edge searching and control

PFor tool edge searching is used CMOS camera L-Pro III.

Features camera L-Pro III, which locating tool edge in the first focal plane XZ of tool setter and which is using industrial PC placed behind monitor are:

Color LCD display with integrated electronic
Live picture on the bright 10.4” screen
1/3” CMOS chip camera with telecentric optic and view area of 6.5 x 6.5mm (optionally 3.5 x 3.5 mm for small tools)
Telecentric LED back light source
Adjustable LED front light
Real tool view
Simple menu control system operated with mouse and/or foil keypad
Possibility to connect ordinary PC keyboard
Measuring units mm/inch
Fixed axis, preset and maximum operating modes
Adjustment bars in the fixed axis operating mode
Automatic evaluation of measured object and measuring task asigning
Test light indicating correct application of measurement function
Absolute, difference and increment measuring mode
Hold value function
Diameter / radius mode
Inverse tool measurement (bell tools)
Resolution of reading 0.001 mm
Linear error correction, parallel correction
99 tool references – each with possibility of direction of counting changing and exchange X to Z
Database of 1000 tools in tool list
Automatic measuring of contours and relevant geometrical data
12 measuring procedures optimized for tool measurement
Measuring programs for line, angle, radius and distance
2x zoom of selected part of the screen
Password protection of important system settings
Serial, Ethernet, USB interface
Hardcopy of screen to PC
Connection to external tool management systems using Ethernet interface *
Postprocessor options for up to 5 machine formats *
DXF pattern comparing to real tool *
Label print, sheet print

* marked possibilities are optional

<< back